| APW12 | ||
OUT1 | DC Voltage | 12V-15V |
| Rated Current(220V input) | 233A | |
| Ripple & Noise | <1% | |
| Liine Regulation | <1% | |
| Load Regulation | <1% | |
| Setup Time | <2S | |
| Short Circuit Protection | >10mS | |
OUT2 | DC Voltage | 12.3V |
| Rated Current(220V input) | 15A | |
| Ripple & Noise | <1% | |
| Voltage Accuracy | 12.2V-12.4V | |
| Line Regulation | <1% | |
| Load Regulation | <1% | |
| Setup Time | <2S | |
| Short Circuit Protection | >10mS | |
Input | Voltage Range | 200-240V AC |
| Frequency Range | 47-63Hz | |
| Power Factor | >0.99(full load) | |
| Leakage Current | <1.5mA（220V 50Hz） | |
Protection | Low-voltage Input | 80-89V AC |
| Output Short Circuit | Yes | |
| Overheat Protection | Yes | |
| Over-current Output | 291A-350A(protecton value varies under different voltage) | |
Environment | Operating Temperature | -20-45℃ |
| Operating Humidity | 20%-90%RH(non-condensing) | |
| Altitude | < 2000m | |
Structure | Dimensions | 254.6*251.6*63mm |
| Net Weight | 3.6kg | |
| Cooling System | force-air cooling | |
| Noise | 45dBA | |
Bitmain Antminer Power Supply APW12 Replacement 4000W
$124.99
-
Description
APW121215 a/b/c/d/e/f/g Power Supply is for S19 and most submodels.
APW121417a For Antminer L7
Please choose the same version as your original psu if you are running on stock firmware.
Additional information
| Weight | 10 lbs |
|---|---|
| Dimensions | 10 × 10 × 10 in |
| Model | 1215A-G New, 1215A-G Used, 1417A New |
Reviews
There are no reviews yet.